American Standard 0621.001 STUDIO Installation Instructions

INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
ABOVE COUNTER SINK
FOR USE WITH: 0621.001 STUDIO
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product
is installed properly, please read these instructions carefully before you begin. (Certain installations may require
professional help.) Also be sure your installation conforms to local codes.
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
!
NOTE: Pictures may not exactly define contour of china and components.
RECOMMENDED FAUCET
Log on to www.americanstandard-us.com for additional faucet selections.
*
RECOMMENDED TOOLS AND MATERIALS
Putty Knife Regular Screwdriver
Hacksaw Phillips Screwdriver
Tubing Cutter Jig Saw
OBSERVE LOCAL PLUMBING AND BUILDING CODES
Countertop Installation:
1a
Using the template provided, locate the position of
the sink on the countertop. Provide proper clearance
under the countertop for the faucet supply lines, drain
assembly and the structural parts of the cabinet.
NOTE: If replacing an existing sink be certain to shut
off water supply before removing old sink.
1b
Mounting on Studio 22" Vanity:
Assemble vanity as per instructions.
2
Drill a clearance hole inside the perimeter line
of the template for countertop installation.
Perimeter
of
template
Cut opening around the perimeter of the template.
3
Mount the faucet and drain assembly (not included)
on the sink following the manufacturer's instructions.
Be certain to apply a bead of sealing putty on the
underside of the drain (Part "A") in order to ensure a
watertight seal between the sink and drain. Remove
excess putty after installing drain on sink.
A
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A S A m e r i c a , I n c .
© A S A m e r i c a , I n c . 2 0 0 8
*
: 2064.101 ONE lavatory faucet
Adjustable Wrench
Pipe Wrench
Silicone Adhesive
Perimeter of
template
Drill
Basin Wrench
Plumber's Putty or Caulking
4a
Countertop Installation:
• Place the sink temporarily into the template
• Check for alignment and clearance
• Mark the sink and countertop in several places
as a guide for the installation location.
4b
Vanity Installation:
• Place the sink temporarily on the vanity to
check for alignment and clearance
• The sink should be centered left to right on the
vanity with the front edge of the sink even with
the front of the vanity
5
After checking fit and alignment, turn sink upside down
and apply a generous portion of silicone adhesive
around the under side of the rim near the edge. Place
sink in position. Wipe off excess adhesive.
Tape Measure
Channel Lock Pliers
73 0 1 2 4 4 - 1 0 0