Covered Areas - Grizzly H3122 Instruction Manual

Covered Areas

In preparation for the finish coating, protect
the following parts of the guitar (Figures 8 &
9):
• Bridge Mounting Location
• Fingerboard
• Sound Hole (Hole Filled With Newspaper)
Figure 8. Masked bridge area and
blocked sound hole.
-10-
Figure 9. Masked fingerboard.
Use a small stick of wood to carefully press all
the masking tape edges securely to the guitar
pieces. The finish coat can seep under these
edges, especially near corners, uneven edges,
and where the frets meet the fingerboard. Note—
Failure to correctly mask off these areas could
result in unrepairable damage to the guitar.
H3122 Classical Guitar Kit