Fingerboard To Neck - Grizzly H3122 Instruction Manual

Fingerboard to Neck

To attach the fingerboard to the neck:
1. Using a straightedge, make sure the neck
and body surface are flush.
2.
Using rubber bands and small sticks of
wood, secure the fingerboard to the neck
with a thin, even layer of wood glue (Figure
5). Note—Make sure the fingerboard is cen-
tered across the width of the neck and that
the 12th fret is centered over the neck to
body joint.
-8-
Figure 5. Securing the fingerboard to the neck.
3. After the fingerboard has thoroughly dried,
use a file or sandpaper to make the edge of
the neck flush with the edge of the finger-
board.
H3122 Classical Guitar Kit