Advertisement
BRIDGED MONO OPERATION:
The Model 652IQ
is built with the right channel inverted. This allows the
©
amplifier to be used in a bridged mono configuration. Using an 8-ohm subwoofer
speaker, hook it up using the two CENTER connections on the terminal strip.
Follow the polarity of the strip as described in the section above.
This amplifier is capable of driving 4-ohm loads in the mono bridged mode. For
increased sound pressure levels, a 4-ohm load may be used. For systems
requiring higher sound quality, an 8-ohm load is recommended. (See diagrams
on next page)
2-Channel Stereo and Bridged/Mono Operational Diagrams
© 2008 Linear Power, Inc. - ALL RIGHTS RESERVED
3
LINEAR POWER™ is a trademark of Linear Power, Inc.
Advertisement
