Soft Key Activation - Toshiba Strata DK 280 User Manual

EXEC-(Executive Override) Press to break into the conversation of a busy
called station.
ACB-Press to activate Automatic Callback after reaching a busy station, CO
line, or CO Line group.
ABR-Press to activate Automatic Busy Redial after dialing a busy outside
telephone number.
RLS-Press to disconnect a call and to return to the idle state.
RTRN-Press to terminate a feature operation and to return to a previously
displayed state.
LINE-Press to add a CO line to an existing call while in the Conference mode.
The LCD will prompt you to access a CO line after you press this key.
STA.-Press to add a station to an existing call while in the Conference mode.
The LCD will prompt you to dial a station number after you press this key.
JOIN-Press while on a conference call to join all parties to a conference.
EXIT-Press to exit from a conference and to leave the remaining parties
connected.
To activate Soft Keys at
your station:
1. Make sure your
telephone is idle. Do
not lift the handset.
2.
Press the
Mode
key
below the LCD.
3.
Press 7 1.
Soft Key Activation
Your telephone must be idle before you follow the steps on the left to activate or
deactivate the Soft Key feature at your station.
Soft Keys are now activated and the appropriate feature prompts will display
when your phone is in use. The Soft Key feature will remain on until you turn it
off. In short, you can perform numerous telephone functions and the Soft Keys
will not be cancelled unless you deactivate them.