Using Soft Keys To Make A Conference Call - Toshiba Strata DK 280 User Manual

Using Soft Keys to Make a Conference Call
1. While on an outside call with CO line (line 3 for this example) your LCD will
display the following prompts:
TALK ON LINE 3
TRNS CONF PGE
Mode
Page
SCKJII
0 I I
Note:
Once the Soft Key prompts appear (in this case, the Soft Keys are
TRNS, CONF, and PGE for Transfer, Conference, and Page), the
buttons below them now stand for Transfer, Conference, and Page
instead of Mode, Page, and Scroll. In the following steps of this
example, only the Soft Key displays will be shown since Mode, Page,
and Scroll no longer apply while Soft Keys are active.
n If you initiated the call, the "TRNS" prompt will appear 30 seconds after
the first digit of the telephone number is dialed-the "ABR" prompt for
Automatic Busy Redial (ABR) will appear during this first 30 seconds (if it
does not appear, then this feature was not assigned in system
programming). If the call is an incoming call, the "TRNS" prompt will
appear immediately when you answer the call.
2. Press the CONF Soft Key to initiate the Conference.
TALK ON LINE 3
TRNS CONF PGE I
n The outside call will be placed on hold and the LCD will appear as
follows after you press the CONF Soft Key in Step 2.
32