Recording A Message; Recording A Message, Name, Or Memo; Dial Pad Information - Toshiba Strata DK 280 User Manual

:-
To Record a Message:
1. Press the # button to
access alpha
characters. Refer to
Figure 4 for an
explanation of the dial
pad buttons.
2. Press * or 1 to move
the cursor (-) to the
desired position (the
left edge of the display
for a new message, or
two spaces to the right
of the preprogrammed
message to add
information).
3.
Press the button that
has the letter you want
to enter. Use the 0
button to shift from
letter to letter on the
button.
4. If you want to enter a
number, press the # _
button to change to
numeric characters.
Press the # button
again to return to alpha
characters.
Recording a Message
Recording a Message, Name, or Memo
Use this procedure to enter the characters of a personal message (10 m 19) or
system message
(60 N 99, Station 200 only), to add to a preprogrammed
message, or to edit and set a new message. After calling up a message on your
display (see Storing a Message in Memory, Steps 1 and 2 on the previous page),
perform one of the following procedures:
1 button moves
cursor to the right
Each button has three
letters that are used in
the alpha mode)
0 button is used to shift between the three letters on each
alpha button (also used to access special characters)
Figure 4
Dial Pad Information
For example: If you press 3, a "D" is displayed. By pressing 0, the
"D" is
changed to "E". By pressing 0 again, the "E" is changed to "F". Press 0 again
and the "F" changes to "D". To enter a space, press 1.
Numbers are also entered on the dialpad.
40