Messages; Types Of Message - Navman M-Nav 800 User Manual

5 Messages

IMPORTANT: The M-Nav 800 must be in the docking cradle and connected to the Qube
tracking device in order for you to send and receive messages, and otherwise communicate
with your fl eet administrator.
The M-Nav 800 can store a maximum of 500 incoming messages and 250 outgoing messages.
If you exceed the limit for incoming messages, the oldest message will be deleted automatically
when a new message is received
5.1

Types of Message

The Message option enables you and your fl eet administrator to communicate with each other.
There are three types of message:
• Information messages. A unique message from your fl eet administrator (e.g. 'Friday
meeting has been changed to 1000 in Room 9'), or a unique message that you send (e.g.
'Sorry, can't attend, working at customer site all day').
• Route-To messages. This type of message contains a location address in the fi rst line of
the message. The M-Nav 800 can navigate you to that address automatically.
• Form messages. Your fl eet administrator can use a Form message to quickly enter and
send information to you in a standard format. Each Form message contains preset fi elds (e.g.
Job Number). Your fl eet administrator may also set up reply Forms for you to use, and set up
Form messages so they are deleted automatically once you have read and replied to them. (A
Form message can also be set up as a Route-To message.)
Examples of the three types of message are shown below.
Information message.
Touch:
• Back to close the message without sending a reply.
• Reply (see section 5.4).
• Delete (see section 5.10).
Route-To message.
These messages have two extra option buttons. Touch:
• Go to exit from the 'Message' screen and navigate to
the location in the message (see section 5.8).
• Show to exit from the 'Message' screen and display
the location on a map (see section 5.9).
Note: If you want to reply to the message, do this BEFORE
you touch Go or Show.
M-Nav 800 | User Manual
17