Closure - Grizzly G7298 Instruction Manual

SECTION 8: CLOSURE
The following pages contain general machine
data, parts diagrams/lists, a troubleshooting guide
and Warranty/Return information for your Model
H4378/H4379.
If you need parts or help in assembling your
machine, or if you need operational information,
we encourage you to call our Service Department.
Our trained service technicians will be glad to help
you.
If you have comments dealing specifically with
this manual, please write to our Bellingham,
Washington location using the address in Section
3: Introduction.
We have included some important safety mea-
sures that are essential to the operation of this
machine. While most safety measures are gener-
ally universal, Grizzly reminds you that each
workshop is different and safety rules should be
considered as they apply to your specific situa-
tion.
Operating this equipment creates the poten-
tial for flying debris to cause eye injury.
Always wear safety glasses or goggles
when operating equipment. Everyday glass-
es or reading glasses only have impact
resistant lenses, they are not safety glasses.
Be certain the safety glasses you wear meet
the appropriate standards of the American
National Standards Institute (ANSI).
-16-
We recommend you keep a copy of our current
catalog for complete information regarding
Grizzly's warranty and return policy. If you need
additional technical information relating to this
machine, or if you need general assistance or
replacement parts, please contact the Service
Department listed in Section 3: Introduction.
Additional information sources are necessary to
realize the full potential of this machine. Trade
journals, woodworking magazines, and your local
library are good places to start.
The Model H4378/H4379 was specifically
designed for grinding. DO NOT MODIFY
AND/OR USE THIS MACHINE FOR ANY
OTHER PURPOSE.
improper use of this tool will void the war-
ranty. If you are confused about any aspect
of this machine, DO NOT use it until all
your questions have been answered or
serious personal injury may occur.
Like all power tools, there is danger asso-
ciated with the
Accidents are frequently caused by lack of
familiarity or failure to pay attention. Use
this tool with respect and caution to lessen
the possibility of operator injury. If normal
safety precautions are overlooked or
ignored, serious personal injury may
occur.
H4378/H4379 Slimline Bench Grinder
Modifications
Model H4378/H4379.
or