Jacuzzi Avalanche Owner's Manual And Installation Manual page 19

Step 19
Align wiper rod to fit through hole in top of
the cover. Place the cover on the filter body
and press firmly downward until the cover
comes to a stop against the filter body.
TIP: It is easier to replace the filter cover if the
air bleed valve is open.
Step 20
Clean the threads of the Ring-Lok nut and the
threads on the filter body with water or a
cloth. Place the Ring-Lok nut on the filter and
tighten to the "built-in stops." Be sure that the
yellow safety latch is engaged.
If the Ring-Lok nut is not tightened to built-in
stops, the filter cover may blow off causing
injury or property damage.
Step 21
Tighten air bleed valve into cover . Screw
wiper handle on to exposed threads of wiper
rod.
You are now ready to perform the system start-up (see pages 7-8).
Cleaning the D.E. grid cassette:
19