Jacuzzi Avalanche Owner's Manual And Installation Manual page 12

Cleaning the pump strainer:
Step 4
Lift the basket out of the strainer and remove
the debris. Reinstall the basket.
Step 5
Clean the o-ring on the clear strainer lid and
re-lubricate with petroleum jelly. Also, clean
all surfaces that come in contact with the o-
ring to assure a good seal.
Step 6
Replace the clear cover and strainer Ring-Lok.
HAND TIGHTEN ONLY. Open the optional
valves if installed.
You are now ready to perform the system start-up (see pages 7-8).
12