Additional Heater - Alfa Romeo 166 Booklet

The dust/pollen filter should be
checked over at least once a year by Alfa
Romeo Authorized Services, preferably at
the beginning of summer.
If the vehicle is habitually driven in pol-
luted areas or on dusty roads the system
should be checked and if necessary
changed more often.
If the filter is not re-
placed the efficiency of
the climate control sys-
tem may be seriously compro-
mised.
88

ADDITIONAL HEATER

(Optional, for JTD and JTD 20V Multijet
versions, where applicable)
The additional heater makes it possible
to integrate heating of the engine coolant
fluid, immediately after starting the en-
gine and when travelling, to more quickly
reach and maintain the optimum operat-
ing temperature of the engine and pas-
senger compartment heater.
The device works completely automati-
cally and it is activated only when the en-
gine is running with an outside tempera-
ture of +5°C or less and a coolant fluid
temperature below 60°C.
When the coolant fluid reaches 61°C,
the electronic control unit reduces the
power of the burner and stops the heater
when a temperature of 72°C is reached,
reactivating it automatically when the flu-
id temperature falls below 60°C. Con-
versely, if after reducing the power of the
burner, the fluid temperature begins to
fall, the control unit cuts in to restore full
power.
The system comprises:
– a fuel oil burner for heating the water
and a combustion gas exhaust silencer.
– A batching pump connected to the car
reservoir pipes to supply the burner.
– An electronic control unit for control-
ling burner adjustment.
– An outside temperature sensor.
IMPORTANT The heater is fitted with
a thermal limiting device which cuts off
combustion in the event of overheating
due to lack/leaks of coolant fluid.
The heater is also protected by the auto-
matic fuel cut-off switch, which shuts off
the fuel in the event of a crash of a cer-
tain size: to see how this works see the
"automatic fuel cut-off switch" para-
graph.