Alfa Romeo 166 Booklet page 174

Front sidelights
To replace the bulb (Type B – H6W,
6W):
– Remove the engine compartment cov-
er after turning the fastening pins.
– Turn counter-clockwise and remove
the direction indicator bulb holder (A-
fig. 45) without disconnecting the con-
nector to widen the working space.
– Remove the rubber cap (B) by pulling
the tab (C).
fig. 45
174
– Press the two retaining tabs and re-
move the bulb holder (D- fig. 46).
– Remove the bulb (E- fig. 47) from
the bulb holder, pushing it slightly and
turning it counter-clockwise.
fig. 46
– Fit the new bulb into the bulb holder,
pushing it slightly and turning it clock-
wise.
– Push the bulb holder down in its seat.
– Fit the rubber cap.
– Fit the direction indicator bulb holder
and lock it by turning it clockwise.
– Refit the engine compartment cover
and secure it by turning the fastening
pins.
fig. 47