Alfa Romeo 166 Booklet page 143

WHEELS
WARNING
The jack should only be
used when changing a
wheel; Do not work under the ve-
hicle when this is only supported
using the jack.
The wheels (rims and tyres) installed in
the factory are those which are most suit-
ed to the characteristics of the vehicle
and guarantee the greatest degree of
safety and comfort under all normal dri-
ving conditions.
Before replacing the rims or tyres in-
stalled on your vehicle consult the table
indicating the permitted types given in
the "Technical specifications" chapter of
this manual or contact Alfa Romeo Autho-
rized Services.
The original rim-tyre match should be
followed when changing tyres.
WARNING
While the specified di-
mensions remain
changed, for travelling safety and
correct operation of the VDC, ASR
and ABS systems the tyres must
absolutely be of the same brand
and type on all wheels, in perfect
conditions and above all of the
specified type and brand.
SPARE WHEEL
Cars fitted with steel rims and tyres
215/55 R16 (*) have spare wheel iden-
tical with the standard wheels. Cars fitted
with aluminium alloy rims and tyres
215/55 R16 (*), 225/45 R17 and
235/40 R18 have the spare wheel with
steel rim and tyre 215/55 R16 (*).
(*) For versions/markets where applic-
able tyres 205/55 R16.
WARNING
On cars fitted with tyres
un- 215/55 R16 (*), 225/45
R17, 235/40 R18 and spare wheel
with tyre 215/55 R16 (*), since
the spare wheel is different from
the standard wheels, observe the
instructions for use given below.
(*) For versions/markets where ap-
plicable tyres 205/55 R16.
IMPORTANTS (when using a s-
pare wheel different from the
other wheels of the car)
– The spare wheel should only be used in
an emergency.
– Use of the spare wheel should be kept
to a minimum. Do not drive at speeds of
over 80 km/h.
– The car will handle differently when the
spare wheel is fitted. Avoid sudden acceler-
ation or braking, sharp corners and fast
bends.
– Check at regular intervals that spare
wheel pressure is equal to 2.7 bar (2.7
kg/cm 2 ).
143