Advertisement
Notes
• W hen installing the camera on a ceiling not to disturb adjustment ofTilt Base angle fix
theBNC-PowerCableonthePanBaseclip.
Pan Base Clip
BNC-Power Cable
Connecting to Power
• Connect the adapter to the power input connector as shown in the figure below.
Use a DC 12V. (The Adapter is not provided with the Dome Camera.)
DOMECamera
PowerInputConnector
Adapter(notprovided)
MINI DOME CAMERA
8
User Guide
Troubleshooting
If you have trouble operating your camera, refer to the following.
If the guidelines do not enable you to solve the problem, contact an authorized
technician.
◾ The image on the screen is dim.
• Check if the lens are stained. If dirty, clean the lens with soft, clean cloth.
• T he image is dimmer at night than daytime. If the focus is not right, adjust it at daytime.
◾ The contrast on the screen is too weak.
• Adjust the contrast feature of the monitor.
• If the camera is exposed under too strong light, change the camera position.
• Adjust the lens BACK FOCUS again.
◾ The camera is not work properly, and the surface of the camera case is hot.
• Check that you have connected the camera to a proper power (DC 12V).
Dimension
MINI DOME CAMERA
12
User Guide
For DC Power Type
Resistance of copper wire [at 20Cº(68ºF)]
Copper wire size (AWG)
#24(0.22mm
2
)
#22(0.33mm
2
)
#20(0.52mm
2
)
#18(0.83mm
Resistance ( Ω / m)
0.078
0.050
0.030
0.018
Voltage Drop (V/m)
0.028
0.018
0.011
0.006
• As the voltage drop according to the length of the cable in the above table,
a camera may malfunction if there is an excessively long cable run.
* Voltage for camera operation: 12V DC ±10%
* Voltage drops in the above table are variable according to types of cable manufacturer.
Connection to Monitor
Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.
• As a connecting method varies according to instruments, refer to the manual supplied
with the instrument.
• Connect the cable after power is turned off.
BNC
DOMECamera
Monitor
MINI DOME CAMERA
9
User Guide
Specification
SCD-2010N
SCD-2030N
SCD-2010P
SCD-2030P
ELECTRICAL
Input Voltage
DC 12V ±10%
Power Consumption
Max 1.8W
VIDEO
Imaging Device
1/3 inch, Sony Super HAD CCD
Total Pixels
811(H) x 508(V)
795(H) x 596(V)
Effective Pixels
768(H) x 494(V)
752(H) x 582(V)
Scanning System
2:1 Interlace
Synchronization
Internal
Frequency
H : 15.734KHz V : 59.94Hz
H: 15.625KHz V : 50.00Hz
Horizontal Resolution
600TVL
Min. Illumination
0.04 Lux / F1.2
S / N (Y signal)
52dB (Weight On, AGC Off)
Video Output
CVBS : 1.0Vp-p, 75Ω composite
LENS
Focal Length
3mm
6mm
3mm
6mm
Angular Field of View
H : 95°, V : 75°, D : 120° H : 46°, V : 34°, D : 60° H : 95°, V : 75°, D : 120° H : 46°, V : 34°, D : 60°
PAN / TILT
Pan / Tilt Range
0° ~ 352° / 0° ~ 75°
OPERATIONAL
Shutter Mode
ESC, A.FLK, Manual
Lens Shade
On / Off (Level adjustable)
SSDR
On / Off (Level adjustable)
Backlight Compensation
BLC / HLC / OFF
Day & Night
COLOR / BW / AUTO (Electronic Type)
Gain Control
Low / High / Off
White Balance
ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)
SENS-UP
Auto / Off (Selectable x2 ~ x512)
MINI DOME CAMERA
13
User Guide
Panning & Tilting Control
You can adjust the Panning and Tilting angle freely. (Panning angle: 360º, Tilting
2
)
angle: 20º~90º)
Tilt Base Holding
Screws
Pan Base
You can rotate the lens
from 360
1) Adjustment Panning angle: After attaching the dome camera to a ceiling, adjust the
panning angle for better monitoring area by rotating the Pan Base. The panning angle
can be adjusted 360º freely.
2) Adjustment Tilting angle: After attaching the dome camera to a ceiling, adjust the
tilting angle for better monitoring area by rotating the Tilt Base. The tilting angle
can be adjusted to 20º from 90º freely. (based the ceiling surface)
Notes
• AfterlooseningPanorTiltBaseholdingscrews,adjustitsangle.Andthentightenscrewsagain.
• I ncaseofadjustingthetilting,donottakethelensforpreventinghysicalshocks.PleasetaketheTiltBase.
• T hisdomecameraistobeinstalledontheceilingbyfactorydefault.
MINI DOME CAMERA
10
User Guide
Specification
Motion Detection
On / Off (8 Programmable zones)
Privacy Masking
On / Off (12 Programmable zones)
SSNR3
On / Off (Level adjustable)
Digital Zoom
On / Off (x1 ~ x16)
DIS
On / Off
Camera Title
On / Off (Displayed 15 Characters)
Sharpness
On / Off (Level adjustable)
Flip / Mirror
On / Off
Communication
Coaxial (Pelco Coaxitron)
Electronic Shutter Speed
1/60 ~ 1/120,000 sec
1/50 ~ 1/120,000 sec
English, Chinese, German, Italian,
English, Korean, Japanese, Spanish,
French, Spanish, Russian, Czech, Polish,
On Screen Display
French, Portuguese, Taiwanese
Romanian, Serbian, Swedish, Danish,
Turkish, Portuguese
ENVIRONMENTAL
Operating Temperature /
-10°C ~ +50°C / Less than 90% RH
Humidity
MECHANICAL
Dimension / Weight
Ø104 x 67mm / 180g
※ The specification for this product may change without prior notice for product improvement.
MINI DOME CAMERA
14
User Guide
Camera Operation
Built-in functions of the SCD-2010, SCD-2030 Camera include the following
Auto Functions
Setting
Tilt Base
Electronic Shutter
You can adjust up and down
ESC
Speed
the camera (20º~90º).
WHITE BALANCE
ATW
Pan Base
Holding Screw
BACKLIGHT
OFF
GAIN CONTROL
HIGH
SSNR3
ON
(Noise Reduction)
SENS-UP
AUTO
SHARPNESS
ON
LENS SHADE
ON
✽ If you need to control OSD menu, It needs control KEY or coaxial controller.
MINI DOME CAMERA
Declaration of Conformity
Application of Council Directive(s)
Manufacturer's Name
Manufacturer's Address
European Representative Name
European Representative Address
Equipment Type/Environment
Model Name
Beginning Serial NO.
Year of Manufacture
Conformance to
We, the undersigned, hereby declare that the equipment specified above conforms to the above
Directive(s).
Manufacturer
SAMSUNG TECHWIN CO., LTD
Signature
Full Name
BONJENG GU
Position
QUALITY CONTROL MANAGER
Place
CHANGWON, KOREA
Date
2010. 02. 01
MINI DOME CAMERA
Descriptions
The shutter is controlled according to the
brightness of screen by automatically.
It can be used within the color temperature
range 1,700K ~ 11,000K.
It helps view a desired area of picture at the
backlight condition.
The gain increases or decreases within the
range of 6dB~34dB.
There is sufficient reduction in noise levels
without causing much ghost imaging.
It helps maintain a bright, clear screen image by
automatically detecting changes in the level in
low light levels without causing much ghost
imaging.
The outline of the video image becomes cleaner
and more distinctive.
It helps correct shading of Lens.
11
User Guide
2004 / 108 / EC
SAMSUNG TECHWIN CO., LTD
SAMSUNG TECHWIN CO., LTD
42, SUNGJU-DONG CHANGWON-CITY,
KYUNGNAM, KOREA, 641-120
MINI DOME CAMERA
SCD-2010/2030
C53C6V3Z200001X, C58I6V3Z200001X
2010.02.01
EN 55022 : 2006
EN 50130-4 : 2003
Legal Representative in Europe
Signature
Full Name
Position
Place
Date
15
User Guide
Advertisement
