Mahindra JINMA-200 Operation Manual page 63

3) Battery
1. Frequently insufficient electric power
⑴ Breakdowns of generator or regulator
or no charging electric current
⑵ Loosened connecting wires of charging
circuit or rust making resistance increase
⑶ Short circuit of plate
2. Automatically discharging of battery,
too high impurity content of plate material
or impure electrolyte
3. Charge capacity of battery distinctively
reduces (low discharging voltage, high
charging voltage, low indensity of
electrolyte and plates sulphurized)
⑴ Frequently insufficient electric power
⑵ Discharge in small electric current for a
long time and not charging in time
⑶ Too low of electrolyte lever, upper part
of plate emerging from electrolyte lever
58
Cause Remedies
Repair generator or regulator
⑵ Check to see whether terminals and bolts
of connecting wires are loose or not and
tighten them, or remove rust
⑶ Check and repair
2. Completely discharge battery or
overdischarge battery to make plate
impurity enter electrolyte then pour
electrolyte out and clean with distilled water,
and refill with new electrolyte and recharge
⑴ Charge for a long time with small electric
current or completely charge and completely
discharge repeatedly
⑵ Make activated material restore. Or
charge with sulphre removal method
⑶ Replenish electrolyte