Toshiba IK-WD04A User Manual page 55

NOTE
● If the default ports are already used by other devices connected to the same router, the
Network Camera will select other ports for the Network Camera.
TM
● If UPnP is not supported by your router, you will see the following message:
Error: Router does not support UPnP port forwarding.
● Below are steps to enable the UPnP
Note that you must log on to the computer as a system administrator to install the UPnP
components.
1. Go to Start, click Control Panel, then click Add or Remove Programs.
2. In the Add or Remove Programs dialog box, click Add/Remove Windows Components.
3. In the Windows Components Wizard dialog box, select Networking Services and click
Details.
TM
user interface on your computer:
TM
55