Fisher & Paykel CG302D User Manual page 11

Adjusting the flame on the dual work burner
High
Both rings
Always start out on High. Both rings of flame
1
will be on in the shaded setting range.
Note: when turned all the way down, the
flame on the outer ring may appear to come
and go. If this occurs, adjust the dial slightly
back towards High for a stable outer ring.
Wok cooking
Use your wok only on the wok burner (dual or mini, depending on model) and with the supplied
wok stand in place, as shown.
Important!
Make sure that the wok stand is stable: its notches need to fit tightly over the pan supports, as
shown.
Make sure the wok does not push any other pans aside. This could make them unstable, or deflect
heat onto nearby walls or the benchtop.
Low
To use the inner ring of flames only, continue
2
turning the dial towards Low. Only the inner
ring will be on in the shaded setting range.
Using your cooktop
High
Inner ring only
Dual wok burner illustrated
9
Low