Front Panel & Top Panel - Vertex Standard FTM-10SR Operating Manual

Vhf/uhf dual band fm transceiver
Hide thumbs Also See for FTM-10SR:
Table of Contents

Advertisement

F
P
RONT
/
keys
These keys select the following operations.
• AF Dual Feature (See page 25)
• ARTS Feature (See page 26)
• Display Dimmer (See page 27)
• Horn Alert Feature (See page 27)
• Intercom Operation (See page 28)
• Monitor Feature (See page 28)
• Public Address (See page 29)
• Volume Level Control while Intercom Operation (See page 32)
PTT keys
Press this key to transmit.
Speak into the microphone while pressing this key.
Release this key to return to receive.
You may change this key function to "toggle"
mode (toggle the "transmit" and "receive" mode
each time the key is pressed). (See page 77)
TX/BUSY Indicator
This indicator glows green when a signal is
received.
This indicator glows red during transmission.
This indicator blinks blue when a message is
received.
This indicator glows white when transmitting
a message.
VOL/SEL key
You may adjust the receiver audio level with the DIAL knob after pressing this key.
The LED to the left of the DIAL knob will glow red when the DIAL knob is set to control
the receiver audio level.
Press this key again or wait for three seconds, to cancel control of the audio level by the
Dial knob.
Mute Function:
Press and hold this key for one second to temporarily mute the receiver audio.
Press this key again to restore the receiver audio.
4
& T
ANEL
P
OP
ANEL
• Reverse (See page 29)
• Scan Operation (See page 30)
• Smart Search Operation (See page 30)
• Squelch Threshold Level (See page 31)
• TCALL (See page 32)
• TX Power Level (See page 32)
MIC
The internal microphone is located
here. Speak into the grill in a normal
voice level while pressing the PTT key.
FTM-10SR O
M
PERATING
ANUAL

Advertisement

Table of Contents
loading

Table of Contents