Selecting The Remote Controller Functions - Toshiba Carrier RBC-AMS41UL Owner's Manual

Remote controller with weekly timer
8
SELECTING THE REMOTE CONTROLLER
FUNCTIONS
• Change the settings of the remote
controller functions as required by taking
the steps below.
How to change the remote controller
functions
1
While operation is shut down, push
the button (43) and
together for at least 4 seconds.
• The numeric displays and
blink, and the fixed louvers display lights.
2
Push the TEMP.
(49).
• Repeatedly push the buttons until the
setting to be changed blinks on the display.
3
Push the TIME
(40).
• Repeatedly push the buttons until the
setting to be changed blinks on the display.
4
Push the
the button (43) to return to the
original screen.
• When the
numeric displays and
blinking and light up, and when the
button (43) is pushed again, they go off.
23-EN
button (48)
display
SETTING
and buttons
and buttons
button (42). Then push
button (42) is pushed, the
display stop
SETTING
Items to be set
• 24-hour/12-hour display setting <code
No.10>
– The 24-hour display or 12-hour (AM/
PM) display can be selected for the
clock which is displayed on the remote
controller.
– This item's selection is also reflected on
the clock displayed on the clock setting
screen and program input screen.
Setting Description
0000: 24-hour display (factory
setting)
0001: 12-hour (AM/PM) display
• Restriction on button operations <code
No.12>
This item sets the range of the restriction
placed on the button operations which can
be applied while scheduled operations are
being performed.
Setting: 0000 (factory setting)
▼ Code No.12
O: Can be operated.
X: Cannot be operated.
Setting [ON/OFF]
0000
0001
0002
0003
0004
– 24 –
Owner's Manual
[MODE] [TEMP.]
O O
X O
X X
O X
O X
O
X
X
X
O