Scheduled Operations - Toshiba Carrier RBC-AMS41UL Owner's Manual

Remote controller with weekly timer
5

SCHEDULED OPERATIONS

• Scheduled operations for a 1-week period
can be performed using this remote
controller.
• Eight (01 to 08) operations for each day of
the week can be set in a scheduled
operation program (item settings).
– The following items can be set in a
program:
a. Operation time
b. Operation start/stop
c. Operation mode
d. Temperature setting (frost protection)
e. Restriction on button operations
f. Save operation
• With a scheduled operation, the air
conditioner is operated at the set
operation time according to the program
which has been set.
• The operation time can be set in 1-minute
increments.
* Restriction on button operations
This function cancels the button
operations while a scheduled operation
is being executed. To use this function,
refer to the "Selecting the remote
controller functions" section and
change the settings before proceeding
with the program settings described
below. The initial (factory) setting calls
for no restriction on the button
operations.
* Save operation
The save operation function is not
provided for some models and systems.
To find out whether the function is
provided, consult your dealer or a
contractor with specialized experience.
* Concerning the "Continue xx" setting
The "Continue" setting can be
established for the operation ON/OFF,
operation mode and temperature
setting items. This setting causes the
current operation modes of the indoor
units to be continued.
* "Continue" is set on the initial screen for
each item of each program number so
13-EN
in the example of the operation given
above there is no need to input anything
for the operation ON/OFF and
operation mode items.
* This function does not work if the "timer
operation function" or "no timer
function" has been selected by
following the steps set forth in the
"Selecting the remote controller
functions" section.
How to set up the operation
programs
• Perform the steps below to set up a
scheduled operation program (item
settings).
* Programs can be set up whether the air
conditioner is running or shut down.
* While these steps are being taken, an
air conditioner which is operating
continues to operate.
1
Push the
• The display transfers to the program input
screen.
• The entire LCD screen starts blinking.
2
Push the
• Repeatedly push the button to move the
day arrow
of the week when the scheduled operation
is to be executed.
3
Push the
• Set the day of the week when the
scheduled operation is to be executed.
• The days of the week display and the day
arrow stop blinking and light up.
– 14 –
Owner's Manual
button (46).
button (45).
to the position above the day
button (42).