Advertisement
Quick Links
UK
Subject to change
Document Ref:
FZT-250/19519/PMR27/issue I/Apr 02
Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced
Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com
Ferm Table Saw
FZT-250
0302-13
USER'S MANUAL
Art.nr. 720085
Screwfix Art.nr. 19519
Advertisement
Related Manuals for Ferm FZT-250
Summary of Contents for Ferm FZT-250
- Page 1 Subject to change USER’S MANUAL Document Ref: FZT-250/19519/PMR27/issue I/Apr 02 Copyright © These instructions are the sole property of Ferm-Omega Tools and may not be reproduced Ferm Table Saw FZT-250 Art.nr. 720085 Screwfix Art.nr. 19519 Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com...
-
Page 2: Safety Instructions
Measurements of bench | 685x430 mm Suction mouth | 30(22) mm Ferm products are manufactured to high quality stan- dards, they are safe and fit for purpose at time of sale, but Weight | 27 kg Lpa (sound pressure level) -
Page 3: Before Using The Saw
SPARE PARTS LIST FZT-250 OPERATIONAL SAFETY Avoid unintentional starting Do not carry plugged in tools with your finger on the Warning! This machine can produce fine dust, switch. Check that the switch is off before plugging in to REF NR... - Page 4 Put the riving knife, the end with the two slots in, it behind the square washer held by the Allen bolts, screw up the Allen bolts hand tight. • Check the curved knife tip is 5mm lower than the blade tips as illustrated. Ferm Ferm...
- Page 5 (maximum 45 degrees eit- her side). Note: The angle on the guide is for indication only – for accu- rate angles test on a piece of scrap first and readjust as neces- sary. Ferm Ferm...
-
Page 6: Using The Saw
Check matters contact: for alignment of moving parts, binding or breakage of Ferm Customer Helpline on: 0115 966 1199 parts, mounting and other conditions that may affect its Monday-Friday 8am –...