Quick Start - Passive Speaker Cabinet; For Passive Full-Range Speakers - Alto SR Series User Manual

1. QUICK START - PASSIVE SPEAKER CABINET

Make all initial connections with all the equipment powered off, and ensure that all the main volume controls are turned
completely down.

-. For Passive Full-range Speakers

1). Connect one side of the speaker cable to the output CHA/CHB or binding post of your stereo power amplifier
and the other side to the input socket of your speaker cabinet.
2). Complete other connections as illustrated.
3). Turn on your mixer first, then the stereo power amplifier.
4). Turn up the volume controls of your amplifier to about 70%.
5). Use PFL function to get the proper input level for the mixer, and adjust the main mix level control to manipulate
the output level.
6). After using, turn off your stereo power amplifier first, then the mixer.
Tripod
Mount
QUICK START
SR Passive Full-range Speakers
Speaker Cable
Stereo
Power Amplifier
Left
Main Mix
Output
Mixer
Speaker Cable
Right
Main Mix
Output
3
Tripod
Mount