Wire Connections; For Passive Speaker Cabinets; For Active Speaker Cabinets - Alto SR Series User Manual

4. WIRE CONNECTIONS

-. For Passive Speaker Cabinets

Please use only the power connectors to make connections with other signal source equipment for the passive speaker
cabinets. The power connector has four terminals: 1+, 1-, 2+, 2-.
In our cabinets, only 1+/1- are used to connect the Speaker+/Speaker-, and 2+/2- are not used.

-. For Active Speaker Cabinets

As to these circumstances, audio connections is mostly intended for the signal flow, so, determine the wire configuration
according to your real application system and its connecting facility. Normally, you have the following choices:
Balanced
£»
TIP RING SLEEVE
TIP RING SLEEVE
Unbalanced
£»
TIP RING SLEEVE
TIP SLEEVE
TIP SLEEVE
TIP RING SLEEVE
1+
2+
Tip
Ring
SLEEVE RING TIP
Sleeve
1
2
3
Tip
Ring
Sleeve
Tip
Ring
Sleeve
Tip
Sleeve
Tip
Sleeve
SLEEVE TIP
Tip
Ring
SLEEVE RING TIP
Sleeve
1
2
3
10
Tip
Ring
Sleeve
1
2
3
1
2
3
1
2
3
1
2
3
Tip
Sleeve
Tip
Ring
Sleeve
1
2
3