5. O
PERATING
Operation
Stand-Alone Mode (Sound-Active, Auto Mode):
This mode allows a single unit to run to the beat of the music.
1)
Set dipswitches position to Sound Active or Auto Mode.
Mode
Sound Active
2)
The unit will react to the low frequencies of music via the internal microphone in Sound Active
mode
3)
Use the audio sensitivity knob on the back of the unit to make the unit more or less sensitive in
Sound-Active mode. Turning the knob counterclockwise decreases the sensitivity; turning the
knob clockwise increases the sensitivity.
DMX Mode
This mode allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with
DMX, please read the DMX Primer on page 13.
1)
Set dipswitches position to DMX mode.
Mode
DMX
2)
Use dipswitches 1-9 to set the DMX address.
DMX Channel Values
C
V
HANNEL
ALUE
000 014
1
015 100
101 255
001 085
2
086 170
171 255
-Note: Channel 1 will override the motor control channel (channel 2)
Kinta™ X User Manual
I
NSTRUCTIONS
Dipswitches
1-10= Off
Dipswitches
10= On
F
UNCTION
Control/Operating Mode
No function
LED's on
Auto
Motor Rotation
Counter-clockwise motor rotation (Slow ~ Fast)
Clockwise motor rotation (Slow ~ Fast)
Motor rotation right-to-left-to-right (Slow ~ Fast)
9
12/16/2008 2:53 PM