How To Set To Freewheel Mode - Drive Medical SPGT-3C-BL SPGT-3C-R, SPGT-3C-G Owner's Manual

To change the seat height
Remove seat (See "To remove the Seat")
Remove the shroud.
Disengage and remove the seat height adjustment pin from the seat post.
Remove the height adjustment pin from each of the three posts.
Raise or lower each post to the desired position.
Reinstall the seat height adjustment pin through the seat post and armrest post.(Bend the end of the
pin lock and position it over the end the pin.)
Reinstall the shroud.
Reinstall the seat.
HOW TO ADJUST THE FOOTREST
To adjust the footrest angle
You can adjust the angle of the footrest with an Allen key (M6).
Turn the setscrew clockwise to raise the front of the footrest.
Turn the setscrew clockwise to lower the front of the footrest.

HOW TO SET TO FREEWHEEL MODE

For your convenience, the Sunfire Plus GT is equipped with a freewheel level. This level allows you to
disengage the drive motors and maneuver the chair manually.
To engage the drive and take power chair out of freewheel
Pull the freewheel lever to "DRIVE" position(left and right).
Activation of the joystick automatically releases the brake so the powered Sunfire Plus GT can be
driven.
5 . O P E R AT I O N
17
Hexagon bolt