Heat & Glo Heat&Glo RUTHERFORD-36 Owner's Manual page 35

• TCT1175 Terra Cotta Cap
Termination Cap
Collar
2 in. (51 mm)
Minimum Height
Chase Top
Chimney
Pipe
Termination cap pipe and chimney section must overlap 1-1/2 in. (38 mm)
Figure 9.7 Installing a TCT1175 Terra Cotta Cap
Place waterproof
sealer under each
flange of the termina-
tion cap and on top of
each screw to help
prevent leaks.
The last section of pipe
must stop between 2 in.
(51 mm) above top of
chase and 7 in. (178
mm) below top of chase
2 in. (51 mm)
7 in. (178 mm)
Chase
Heat & Glo • RUTHERFORD-36 • 4059-341 Rev D • 03/09 35