Pairing A Bluetooth Compatible Device With Ssp (Secure Simple Pairing); Pairing A Bluetooth Compatible Device Without Ssp (Secure Simple Pairing); Bluetooth Setup; Setting The Bluetooth Connection (Bt In) - Alpine CDE-134BT Owner's Manual

Pairing a BLUETOOTH compatible device with
SSP (Secure Simple Pairing)
1
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver" for pairing.
2
Turn the Rotary encoder to change the head unit display
from "PAIR NO" to "PAIR YES", and then press ENTER.
If "PAIR NO" is selected, the connection will be cancelled.
3
If the pairing was successful, "CONNECTED" is displayed
for a few seconds. The head unit then returns to its
previous state.
Pairing a BLUETOOTH compatible device without
SSP (Secure Simple Pairing)
1
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver" for pairing.
2
Input the PIN code ("0000") in a BLUETOOTH compatible
device.
Note
• The PIN code is fixed as "0000".
3
If the pairing was successful, "CONNECTED" is displayed
for a few seconds. The head unit then returns to its
previous state.
Notes
• If the connection is unsuccessful, "FAILED" is displayed.
• After a successful pairing, the two devices should re-pair automatically
whenever the vehicle's ignition is turned ON. However, the re-pairing
may fail. If the auto re-pairing fails, try to pair manually.
• Set "VISIBLE M" to VISI M ON to enable this unit to be recognised by a
BLUETOOTH compatible device, refer to "Setting the Visible Mode" on
page 25.
• You can also manually pair the BLUETOOTH devices from this unit.
For details, refer to "Pairing a BLUETOOTH Device from the unit" on
page 25.

BLUETOOTH SETUP

Note
• Set "HFP" or "AUDIO" to ON, and then perform BLUETOOTH
SETUP operation. Refer to "Setting the BLUETOOTH Connection (BT
IN)" on page 24.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select "BLUETOOTH", and then
press ENTER.
The BLUETOOTH setup mode is activated.
3
Turn the Rotary encoder to select the desired items and
then press ENTER.
BLUETOOTH:
*1
 PAIRED DEV  VISIBLE M
BT IN
*2
 CALLER ID
CALL SOUND
*2
 PB ORDER  AUTO ANS
 FW VERSION  FW UPDATE
24
-EN
*1 *1
 SEARCH DEV 
*2 *2
 PB UPDATE  BT MENU
*2 *2
 SEV NAME  SPEAKER SL
*1
The items are not displayed during a phone call.
The items are not displayed if "HFP" is set to OFF. Refer to
"Setting the BLUETOOTH Connection (BT IN)" on page 24.
4
Turn the Rotary encoder to change the settings.
5
Press and hold AUDIOSETUP for at least 2 seconds.
The SETUP mode is cancelled.
Notes
• Press  to return to the previous mode.
• Pressing and holding  for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting the BLUETOOTH Connection (BT
IN)
 Setting item: BT IN
 Further setting items: HFP / AUDIO
Setting contents:
OFF / ON (Initial setting)

Hands-Free Phone setting (HFP)

ON:
Select when you want to pair your BLUETOOTH compatible phone
with this unit.
OFF:
Hands-Free Phone function is not used.

BLUETOOTH Audio setting (AUDIO)

ON:
Select when you want to use BLUETOOTH Audio function.
OFF:
BLUETOOTH Audio function is not used.

Setting the BLUETOOTH Device

 Setting item: PAIRED DEV
1
Turn the Rotary encoder to select a BLUETOOTH
compatible device you want to use (you want to change
connection) and then press ENTER.
2
Turn the Rotary encoder to select "CONNECT" to connect
the selected device.
The connected device is marked with "l". Select "DISCONNECT"
to disconnect this device. Select "CLEAR" when you want to clear
the device from the device list.
Notes
• If the connection is successfully changed, "CONNECTED" is displayed
for 2 seconds and the  indicator lights up, then the display returns to
the SETUP screen.
*2
• If all the 3 positions have been registered, you cannot register the 4th
*2
device. To register another device, you need to delete one of the devices
from position 1 to 3 first.