Transmit Midi Program Change - Kawai CL20 Owner's Manual

9. TRANSMIT MIDI PROGRAM CHANGE

or personal computer to create performances with a variety of timbres.
The term "Multi-Timbral" is derived from the ability to play multiple
timbres simultaneously.
NOTE:
You can assign any sound of the CL20 piano to any channel in the way
you like by sending the correct Program Change Number to the CL20
piano from an external MIDI device. Please refer to the list below for
assignment of sound and program number.
(1) Press the "MULTI" key while holding down the METRONOME
and CONCERT MAGIC buttons.
(2) While still holding down the METRONOME and CONCERT
MAGIC buttons, pressing the "off" key sets the Multi-Timbral mode
to "off". If you press the "on" key, this function returns to "on".
Sound
Concert Grand
Modern Piano
Electric Piano
Church Organ
Harpsichord
Vibraphone
Strings
Choir
You can set the CL20 piano if it should transmit Program Change
Numbers via MIDI when the sound is changed on the control panel.
(1) Press the "PROGRAM" key while holding down the
METRONOME and CONCERT MAGIC buttons.
(2) While still holding down the METRONOME and CONCERT
MAGIC buttons, pressing the "off" key sets the CL20 piano not to
transmit the program change data corresponding to the sound selected
on the panel. If you press the "on" key, this function returns to "on"
and selecting a sound will transmit the data.
(3) You can also transmit the desired program change number directly
by entering the number as a three digit number by using the number
– 22 –
Program Number
Multi-Timbre "on"
1
2
5
20
7
12
49
53
Multi-Timbre "off"
1
2
3
4
5
6
7
8