Trouble Shooting; How To Contact Your Authorized Retailer; Visit Simplicity On-Line - Simplicity Synergy X9 Owner's Manual

Trouble Shooting

PROBLEM
Vacuum won't turn on
Vacuum won't pick up or
low suction
Dust escaping from vacuum
POSSIBLE REASON
• P ower cord not firmly
plugged in
• B lown fuse or tripped
breaker
• Needs service
• "Carpet" switch not on
• Vacuum bag full
• Clogged filter
• Hose clogged
• Worn brush strips
• Broken belt
• T ool activation dial
turned on
• D ust cover not seated
properly
• F ilter not installed
correctly
• V acuum bag not installed
correctly
Any other service should be done by an
Authorized Service Representative.
Service 1-888-9-SIMPLY
To locate your nearest retailer, visit our website at
www.simplicityvac.com
Problem Solving Guide
POSSIBLE SOLUTION
• Plug unit in firmly
• C heck house fuse or
• T ake to Authorized Retailer
• Turn "carpet" switch on
• Install new bag
• Install new filter
• R emove obstacle
• Replace brush strips
• T ake to Authorized Retailer
• T urn tool activation dial to
• R einsert the dust cover
• R eview filter installation
• R eview bag installation
25
breaker. Replace fuse /
reset breaker.
(-888-9-SIMPLY)
for belt replacement
"off" position
and secure latch
(page 20)
(page 9)