Values Display; Head Temperature; Software Version - Barco Technospot User Manual

CHAPTER 3
Menu System

Values Display

This menu option lets you view the current DMX value for each of the fixture's 37 parameters.
To view DMX values by Parameter:
1. Navigate to and select the Info menu as shown on page 23.
2. Using the
3. Using the
and press the

Head Temperature

The Technospot fixture contains temperature sensors that monitor the air temperature inside the
lamp housing.
To view temperature:
1. Navigate to and select the Info menu as shown on page 23.
2. Using the
The temperature will be displayed in degrees Celsius or Fahrenheit depending on which scale
is currently selected in the Set menu, see Temp C/F on page 29.

Software Version

This Info menu option displays the current fixture software loaded on the unit. Software versions
can vary even between units purchased at the same time.
To view fixture :
1. Navigate to and select the Info menu as shown on page 23.
2. Using the
24
buttons, scroll to Values Display and press the
buttons, scroll to any of the DMX parameters in the Technospot protocol
button to view its current DMX decimal value.
buttons, scroll to Head Temp and press the
buttons, scroll to Software Ver and press the
button to select.
button to select.
button to select.
Technospot User Manual
TM