Music Control; Edit Scenes; Edit Scene Parameters; Edit Scene Time - Barco Technospot User Manual

CHAPTER 5
Preset Programming

Music Control

This Playback option lets you designate a fixture to playback scenes based on audio triggers
detected by the internal microphone in stand alone or as a Master. Alone is the default setting.

Edit Scenes

A parameter is a fixture attribute that can be controlled to modify the light beam in terms of color,
beam quality and pattern, intensity, or focus (position). DMX programming assigns a DMX value to
each of the fixture's parameters. A scene is one combination of parameter settings.
Technospot fixtures provide 250 pre-programmed scenes you can use or edit to build a preset
program. The first 64 scenes have factory created settings which can be edited as desired.

Edit Scene Parameters

The Edit Scenes option lets you select a DMX value for any of the 37 parameters in the
Technospot DMX protocol.
To edit the DMX parameters in a scene:
1. Navigate to and select the Preset menu as shown on page 49.
2. Use the
3. Use the
press to select.
4. Use the
Shutter, Cyan Color, Gobo Wheel 1, etc.) and press
5. Use the
and press to select.
This takes you back to parameter options. Continue through all parameters until your desired
look is complete. See Chapter 4: DMX Programming on page 33 to find parameter values for
the option you want to assign.
6. When you are finished selecting all parameter values for a particular Scene, press the
button to return to the Preset level menu.

Edit Scene Time

This Scene Edit option lets you set the scene time in seconds from 00.2s–99.9s. The default
value is 00.3s. This values determines how long the scene will play before the next scene is
triggered.

Set Fade Time

This Scene Edit option lets you set a fade time value from 000–255. This values determines the
crossfade time applied to parameters once the scene is triggered.
50
buttons to scroll to the Edit Scenes option and press
buttons to scroll to the Scene number you wish to build on from 1-250 and
buttons to scroll to the the parameter you wish to edit (Pan, Tilt, MSpeed,
buttons to scroll to a new DMX value for the parameter you have selected
to select.
to select.
Technospot
TM
MODE
/ ESC
User Manual