Table of Contents
Advertisement
Configuring Technospot for DMX Control
Each Technospot fixture requires a block of 37 consecutive channels on a standard DMX512 link.
Up to 13 standard Technospot fixtures can be assigned to a single link. For more information on
Start Channels, see Determining DMX Start Channel Assignment on page 22. Address your fixture
by setting the first channel of the channel range you want to assign this fixture on the link.
Addressing is done for each unit using the fixture's menu system. You can access the menu
system is in battery mode to Address the fixture before you mount it or apply power.
Setting a Start Channel in Battery Mode
To address a Technospot fixture in battery mode:
1. Turn on the menu system by pressing and holding the
Battery button for two seconds. The display will show
the current Function and the Start Channel currently
assigned to the fixture.
2. Press the
MODE/ESC button to enter the first level
MODE
/ ESC
of the menu system. The display will show Address and
Info as the first two options in the top menu level.
The red star
indicates the option you are on as you
*
scroll through the levels using the
The number at the bottom left of the display indicates
the Menu Level you are on. Address is the first option
on the first level.
3. Press the
Enter button to choose Address. The
currently selected Start Channel is displayed in white.
4. Using the
and
available values (displayed in red) to the desired start
channel and press
value will now appear in white the next time you enter
the menu.
5. The new address will not be stored until the
button is pressed.
Note:
For a detailed description of the entire menu system, see Chapter 3: Menu
System on page 15.
Technospot
User Manual
TM
and
buttons, scroll through other
to select. The newly selected
F u n c t i o n : D M X R e c e i ve
Address:
Menu: Press <Mode>
buttons.
001
Enter
CHAPTER 2
Setup and Configuration
001
073F
Address
Info
01
Address
01-01
13
Advertisement
Table of Contents
