Values Display; Head Temperature; Software Version - Barco SolaSpot LED User Manual

Values Display

This menu option lets you view the current DMX value for each of the fixture's 28 parameters.
To view DMX values by Parameter:
1. Navigate to and select the Info menu as shown on page 24.
2. Using the
3. Using the
and press the

Head Temperature

The SolaSpot LED fixture contains temperature sensors that monitor the air temperature inside
the housing near the display board.
To view temperature:
1. Navigate to and select the Info menu as shown on page 24.
2. Using the
The temperature will be displayed in degrees Celsius or Fahrenheit depending on which scale
is currently selected in the Set menu, see Temp C/F on page 28.

Software Version

This Info menu option displays the current fixture software loaded on the unit. Software versions
can vary even between units purchased at the same time.
To view fixture:
1. Navigate to and select the Info menu as shown on page 24.
2. Using the
SolaSpot LED User Manual
TM
buttons, scroll to Values Display and press the
buttons, scroll to any of the DMX parameters in the SolaSpot LED protocol
button to view its current DMX decimal value.
buttons, scroll to Head Temp and press the
buttons, scroll to Software Ver and press the
CHAPTER 3
Menu System
button to select.
button to select.
button to select.
25