Wireless Advanced Settings - EnGenius ENH700EXT User Manual

7.2.2 Wireless Advanced Settings

Data Rate
Transmit Power
RTS / CTS Threshold (1-2346)
Distance (1-30km)
Aggregation
No changes made in the System section of the ENH700EXT will be in effect until
Save & Apply is selected in the Save/Reload option of the Status section.
Selecting Accept or Save in the System section will not reconfigure the router.
Changing Wireless Advanced Settings may lower the wireless connection
quality. Please keep all settings as default unless you understand the
modifications which you have made
The Data Rate of the ENH700EXT affects the throughput of
data transfer. A higher data rate selected will have a faster
throughput. Lower will increase the distance in which the
signal will reach.
The transmit power will allow the ENH700EXT to extend the
area of coverage. However, when increasing it too much, the
wireless connection may be unstable.
The number on the list associated with the client MAC
address. This option affects the size of the packets that will
be passed along to transmit data. Smaller thresholds will
result in more transmissions of data.
Specify the distance between the access points and clients.
Further distances will result in lower connection speeds.
Please note, the distance setting allows you to control to
timing, it is not a tool for you to measure distance.
Aggregation allows packets to be sent together to lower the
amount of transmissions.
ACK
35