Dynamic Routing Setup - EnGenius X-TRA RANGE ERB300H User Manual

C T
HAPTER ITLE

6.4.9 Dynamic Routing Setup

Note:
This section applies to Client Router mode.
The Router supports the Routing Information Protocol (RIP). RIP allows you to set up routing information on one RIP enabled device,
and have that routing information replicated to all RIP enabled devices on the network.
Dynamic Routing Enable or disable dynamic routing.
RIP Transferring Select the RIP to transfer data on all RIP
enabled devices.
RIP Receiving Select the RIP to receive data on all RIP
enabled devices.
Password Enter the password of the RIP enabled device.
Click Apply to save the settings or Cancel to discard changes.
6-66
D R S
YNAMIC OUTING ETUP