B
N
S
ASIC
ETWORK
ETTINGS
6.1.2 Basic Settings
Define the device mode, signal band and connect to multiple ESSIDs.
Note:
This section applies to Client Router mode and Client Bridge mode.
Radio
Enable or disable the wireless radio. If the wireless radio is disabled,
wireless access points are not available.
Mode
Select the wireless operating mode for the ERB300H/ERB150H.
Band
Select the wireless band protocol. The following options are available:
2.4GHz (B)
2.4GHz (N)
2.4GHz (B+G)
2.4GHz (G)
2.4GHz (B+G+N)
Click Site Survey to scan the area for wireless routers that the ERB300H/
ERB150H can connect to. See step 8 of Using the ERB300H/ERB150H as a Media
Entertainment Bridge for detailed instructions on adding an access point profile.
6-18
B
S
ASIC
ETTINGS
W