Supplied Accessories; Charging The Battery - RELM RPV599A Owner's Manual

Supplied Accessories

Please carefully take the transceiver out of the box. We recommend that you confirm the items
listed in the following table before discarding the box. If any items are missing or have been
damaged during shipment, file a claim with the carrier immediately.
Antenna
Belt clip
Screw set
External speaker-microphone jack cover
Locking bracket for speaker-microphone
Battery
Charger
Warranty card
Owner's Manual

Charging The Battery

The factory does not charge the battery before it is shipped It must be charged before being used.
Repeat charging and discharging for two or three times to optimize its charging capacity. When
the battery voltage becomes low to the point the radio indicates low voltage (flashing led, no
display...), the battery should be recharged or replaced with a charged battery.
RELM Communications, Inc.
Item Qty. (pcs)
1
1
1
1
1
1
1
1
1
•
Slide the battery pack or transceiver
with a battery back into the charger.
•
Make sure the battery pack contacts
make contact with
terminals.
•
When the battery begins charging, the
status LED is red; and when the battery
is fully charged the status LED is
green.
the charging
7