Quick Setup Guide - Numark iDJ Quick Start Owner's Manual

Quick Connection Diagram

Quick Setup Guide

1. Make sure all items listed on the front of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT
3. Study this setup diagram.
4. Place the mixer in an appropriate position for operation.
5. Make sure all devices are turned off and all faders are at zero.
6. Connect all input sources as indicated in the diagram.
7. Connect the outputs to the power amplifier(s), monitors and/or projectors.
8. Plug your mixer and other devices into AC power.
9. Switch everything on in the following order:
• Audio input sources (i.e. iPods, CD players) Your mixer
• Last, any amplifiers, televisions, monitors, projectors, etc.
10. When turning off, always reverse this operation by powering down in the following order:
• Any amplifiers, televisions, monitors, projectors, etc.
• Your mixer.
• Last, audio input sources.
11. Go to www.numark.com for product registration.
2