Table of Contents
Advertisement
7) Do not strain the tool by holding the speed control trigger halfway so that the motor stops.
8) Be careful not to get dust inside the chuck.
9) Do not touch the rotating parts to avoid injury.
10) Do not use the tool continuously for a long period of time. Stop using the tool from time
to time to avoid overheating of the motor.
11) Do not drop the tool.
Unpacking
Carefully remove the product and any accessories from the box. Make sure that all items
listed in the packing list are included.
Package contents
A) 12V Rotary hammer drill
B) 1 hour fast Charger
C) User manual
D) 4 pcs accessories (1pc 10mm chuck, 1pc Ø6, 1pc Ø8 and 1pc Ø10 SDS drill bit)
Functional Description
WARNING: Disconnect the plug from the power source before making any assembly,
adjustments or changing accessories. Such preventive safety measures reduce the risk
of starting the tool accidentally.
Operation
CAUTION! Always be sure that the tool is switched off before assembly, including
insertion or removal of the battery pack.
Installing or removing battery pack.
1. To remove the battery pack, withdraw it from the tool while depressing the tabs (Fig.2)
on both sides of the battery pack.
2. To insert the battery pack, align the ribs on the top of the battery with the grooves in
the housing and slide it into place. Always insert it all the way until it locks in place with a
little click. Lightly pull on the battery pack to ensure it is locked into place and will not
accidentally fall out of the tool, causing an injury.
3. Do not use force when inserting the battery pack. If the battery does not slide in easily,
it is not being inserted correctly.
(Fig.1)
15
Advertisement
Table of Contents
