Setting Up Web Interface Management; Pre-Requisites - 3Com SuperStack 3 Switch 4400 Series Getting Started Manual

52 C 3: S
HAPTER ETTING
Setting Up Web
Interface
Management

Pre-requisites

Windows 95 Windows 98
Netscape 4.76
Netscape 6.2
Internet Explorer
5.0, 5.5 and 6.0
U M
P FOR ANAGEMENT
This section describes how you can set up web interface management
over the network.
Ensure you have already set up the Switch with IP information as
■
described in "Setting Up Overview"
Ensure that the Switch is connected to the network using a Category
■
5 twisted pair Ethernet cable with RJ-45 connectors.
A suitable Web browser.
■
Choosing a Browser
To display the web interface correctly, use one of the following Web
browser and platform combinations:
Table 8 Supported Web Browsers and Platforms
✓ ✓
✕ ✓
✓ ✓
For the browser to operate the web interface correctly, JavaScript™ and
Cascading Style Sheets must be enabled on your browser. These features
are enabled on a browser by default. You will only need to enable them if
you have changed your browser settings.
To enable style sheets in Netscape Navigator 4.76 on Solaris 2.6, open
Netscape Navigator and select Edit > Preferences > Fonts. Select the Use
document-specified fonts, including Dynamic Fonts radio button. You
should also set the font sizes as follows:
Variable Width Font - Size 10.0
■
Fixed Width Font - Size 12.0
■
This ensures that the text spacing is correct. Finally in the Advanced
category ensure that Enable Java Script and Enable style sheets are
checked.
on
Windows NT Windows
4 2000
✓ ✓
✓ ✓
✓ ✓
page 36.
Windows XP
✓
✓
✓
Solaris
2.6
✓
✕
✕