Solving Software Upgrade Problems - 3Com SuperStack 3 Switch 4400 Series Getting Started Manual

Solving Software
Upgrade Problems
If your IP network is internal to your organization only, that is, you do not
access the Internet, you may use any arbitrary IP address as long as it is
not being used by another device on your network. 3Com suggests you
use addresses in the series 192.160.100.X (where X is a number between
1 and 254) with a subnet mask of 255.255.255.0. These suggested IP
addresses are part of a group of IP addresses that have been set aside
specially for use 'in house' only.
These suggested IP addresses are part of a group of IP addresses that
have been set aside specially for use 'in house' only.
You can upgrade the management software of the Switch by using the
System > Control > Software Upgrade operation in the Web Interface, or
the system control softwareUpgrade command in the
command line interface. For details on these options, refer to the
Management Interface Reference Guide supplied in HTML format on the
CD-ROM that accompanies your Switch.
If you have problems with your software upgrade, refer to the Problem
Solving section in the Management Interface Reference Guide.

Solving Software Upgrade Problems

61