Avaya 1608 End User Manual page 15

5. Press the Change softkey or the OK button to toggle between Headset and Speaker.
If you selected Headset, then using the audio path will automatically go to the headset when you dial a call.
o
If you selected Speaker, then using the audio path will automatically go to the speakerphone when you dial a
o
call.
6. To exit this screen press the Phone/Exit button.
To adjust the contrast of the display:
1. Press the A button.
2. Select Screen/Sound Options.
3. Press the Select softkey or the OK button.
4. Select Contrast.
5. Press the Select softkey or the OK button.
6. Scroll to the right or left to adjust the contrast.
7. To exit this screen press the Phone/Exit button.
To turn show incoming call on or off:
You can set your call settings to automatically display incoming calls. You can turn the Show Incoming Call option on or off.
1. Press the A button.
2. Scroll to Call Settings.
3. Press the Select softkey or the OK button.
4. Select Show Incoming Call.
5. Press the On or Off softkeys, the OK button, or the right or left navigation arrow to turn Show Incoming Call on or
off.
6. To exit this screen press the Phone/Exit button.
To specify what number the redial feature will dial:
1. Press the A button.
2. Scroll to Call Settings.
3. Press the Select softkey or the OK button.
4. Select Redial.
5. Press the Change softkey or the OK button to toggle between One and List.
If you selected One, then using the redial function will cause the phone to dial the last number you dialed.
o
If you selected List, then using the redial function will cause the phone to display a list of the last numbers you
o
dialed and permit you to choose.
6. To exit this screen press the Phone/Exit button.
To change the ring pattern:
1. Press the A button.
2. Select Screen/Sound Options.
3. Press the Select softkey or the OK button.
4. Select Personalized Ringing.
5. Press the Select softkey or the OK button.
6. Scroll up or down to see a list of the available ring patterns.
7. Select a ring pattern to listen to it. If you want to hear it again, press the Play softkey.
8. Press the Save softkey.
Your new ring pattern is saved.
o
9. To exit this screen press the Phone/Exit button.
To adjust the brightness of the display:
1. Press the A button.
2. Select Screen/Sound Options.
3. Press the Select softkey or the OK button.
4. Select Brightness.
5. Press the Select softkey or the OK button.
6. Scroll to the right or left to adjust the brightness.
7. To exit this screen press the Phone/Exit button.
1608 IP Telephone End User Guide | 15 | P a g e