Connecting To A Stereo Component - LENCO DV-9831 Owner's Manual

Dvd, dvd-r, dvd+r, dvd-rw, vcd,svcd,dvcd,cvd,mp3,picture cd, cd, cd-g, hdcd, cd-r, cd-rw readable

Table of Contents

Connecting to a Stereo Component

By connecting the digital output (SPDIF) on the DVD player through a coaxial cable (optional accessory)

to a Dolby Digital/DTS amplifier or processor, you can enjoy full 5.1 channel surround sound. Follow

these steps for making the connection.

1.Turn off both DVD player and your stereo system.

2.Connect the SPDIF to your stereo system as illustrated below.

3.Slide INPUT/OUTP to OUPUT.

4.Turn on power of DVD player.

P E

Depending on your amplifier system, you need to make the following selection from MENU:

1.Refer to Changing Audio Output on page 23

2.Select SPDIF/RAW if your amplifier has 5.1-channel decoder.

3.Select SPDIF/PCM if your amplifier has 2 channels.

4.Select OFF, if there is no digital signal output from the DVD player.

Coaxial cable

SPDIF(black)

Coaxial terminal connecting stereo system

COAXIAL

Coaxial cable

COAXIAL(black)

5 9

Table of Contents