Table of Contents
Advertisement
BASIC CONNECTION
It is recommended to connect a multi-system TV.
Ensure that this player and other equipment to be connected are set to the standby mode or off and disconnect the AC power cords
before commencing connection.
Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely.
Read through the instructions before connecting other equipment.
Ensure that you observe the color coding when connecting audio and video cables.
Note:
During DVD play, the TV volume may be at a lower level than during TV broadcasts, etc. If this is the case, adjust the volume to the
desired level.
If the DVD/VCD/CD player is connected to the TV through a video cassette recorder, the picture may not be played back normally
with some DVDs. If this is the case, do not connect the player via the VCR.
Connecting to a stereo TV set
A/V cable
Connecting to a an affiliated screen
This unit is equipped with another affiliated screen, you can use the affiliated screen and player to appreciate the programme at the
same time, the connecting method is illustrated as below using the in car adaptor.
Slave screen connector
To the cigarette lighter socket
3
TV SET
Advertisement
Table of Contents
