Status Lamp - Brother QL-710W/720NW User Manual

10

5 Status Lamp

Definition of Status Lamp
Status lamp on the Brother QL printer indicates the current operating
condition.
Lamp
Not lit
Green lamp is lit
Green lamp is flashing
Orange lamp is lit
Orange lamp is flashing
Red lamp is lit
Red lamp is flashing
Flashing green, orange then red
Power is OFF.
Power is ON.
Receiving data from the PC.
Transferring data.
Creating Printer Set-up Information data.
The roll cover is open. Close the roll cover correctly.
The machine is in the transitional reset state.
Cooling (Wait for the temperature of the print head to cool down).
Reset in progress.
The machine is booting.
Indicates one of the following errors.
Red lamp flashing slowly (in one second intervals):
• End of DK Roll
• Incorrect DK Roll installed
• Feed error
• No DK Roll
• Transmission error
• The roll cover was opened (while running)
• Data deployment error
• Access point search/connection error
Red lamp flashing at irregular intervals:
• Cutter error
Red lamp flashing quickly:
• EEPROM error
Setting the IP address.
Condition