NPower 4575000 Owner's Manual

NPower 4575000 Owner's Manual

5000w power inverter

Advertisement

5000W Power Inverter
OWNER'S MANUAL

Model number-4575000

TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4575000 and is the answer not in the manual?

Questions and answers

Summary of Contents for NPower 4575000

  • Page 1: Model Number

    5000W Power Inverter OWNER’S MANUAL Model number-4575000 TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS 1. Introduction ................... 1 2. Important Safety Information ..............1 3. Protective Features ................4 4. Features ....................6 5. Installation .................... 8 6. Operating Instructions ................. 11 7. Troubleshooting................... 13 8. Specifications ..................16 9. Warranty ....................17...
  • Page 3: Introduction

    1. Introduction Thank you for purchasing the NPower Digital Power Inverter, a high performance solution for using household power while on the road. Connected to the 12 V output in your vehicle, the inverter efficiently and reliably supplies 115 V/60 Hz AC power with 4000 W continuous output...
  • Page 4 CAUTION: Instructions provide information that could damage your inverter or equipment connected to it! WARNING: Instructions provide information on conditions that could result in personal injury or loss of life! Warning! Shock hazard! Keep away from children! Warning! The inverter produces the same potentially lethal AC power as normal household outlets.
  • Page 5 Warning! Always make all AC connections before making DC connections or the components built into the inverter can become energized producing an electrical shock hazard. Never work on the AC wiring without first physically disconnecting the DC connections Warning! If connected with loads of over 2000 W, two sets of same size wirings must be connected to the same battery or the connected battery kit.
  • Page 6: Protective Features

    Caution! Connect the unit to batteries with a normal output of 12 V DC only. A 6 V battery’s voltage is too low, and a 24 V battery’s voltage is too high and will damage the unit. Additional Safety Guidelines! •...
  • Page 7 Low-input Voltage Shutdown When the 12 V DC power supply voltage drops below 10.5 ± 0.3 V, the inverter will automatically shut down, and the digital display showing “LUP”. Low-input Voltage Alarm When the 12 V DC power supply voltage drops below 11 ± 0.3 V, an audible alarm will sound and the digital display showing “LUP”...
  • Page 8: Features

    4. Features Figure 1: Digital Power Inverter Front Panel 1. Red LED—Indicates that the consumption of the loads is under 1000 W, and the digigal display showing output power loads in watts. 2. Yellow LED—Indicates that the consumption of the loads is over 1000 W, and the digigal display showing output power loads in kilowatts.
  • Page 9 6. Power Switch Button— Turn the inverter ON or OFF. 7. Digital Display— Shows input voltage (in volts), output power (in kilowatts and watts), and error code information. The allowed power tolerance is 15% (with loads of over 300 W), and the allowed voltage tolerance is +/- 0.2 V (no load).
  • Page 10: Installation

    5. Installation The unit must be operated in an area that meets the following requirements in order to operate safely and provide optimum performance: Description Don’t allow water or other liquids to drop or splash on the unit. Ambient air temperature should be between 32°F and (0°C- 40°C) (the cooler the better within this Cool range if the ambient temperature is high, the output...
  • Page 11 dust or debris. Especially important if it is in working condition. Your Digital Power Inverter supplies max continuous 5000W (5 min) power with 10000 W of surge power. When you turn on an appliance or a tool that operates using a motor or tubes, it requires an initial surge of power to start up.
  • Page 12: Connecting The Inverter

    Connecting the inverter: 1) Place the inverter on a flat surface, such as on the vehicle floor. 2) Please make sure that the inverter is shut down. 3) Attach the ring type connector marked with red to the positive (+) DC terminal on the power inverter, and attach the ring connector marked with black to the negative (-) DC terminal.
  • Page 13: Operating Instructions

    6. Operating Instructions 1) When properly connected to a 12 V outlet or battery, turn on the inverter, and the digital readout will switch on and the unit will deliver AC power to the outlet(s). 2) Plug the AC product(s) you wish to operate into the AC outlet(s) 3) Switch them on, one at a time (Please do not turn on all at the same time).
  • Page 14 Caution! Most vehicle batteries are designed to provide short period of very high current for starting the engine. They are not designed for a constant “deep discharge”. Constantly operating the unit from a vehicle battery until the low voltage shut off will affect the life of the battery. If you are operating electrical products for extended periods of time, you should consider connecting the unit to a separate deep discharge battery.
  • Page 15: Troubleshooting

    Caution! Operating time will vary depending on the charge level of the battery, its capacity and the power level drawn by the particular AC load. With 4000 W load, the operating time is depending on the vehicle battery capacity. When using a vehicle battery as a power source, it is strongly recommended to start the vehicle every hour to recharge the battery before its capacity drops too low.
  • Page 16 AC products connected Reduce load, use a are rated at more than product with power rating 5000W; overload less than 5000 W. Unit is shutdown shutdown has occurred. with display Use a product with AC products are rated showing ”OLP” starting surge power less than 5000 W, but within the inverter’s...
  • Page 17 permanent damage can occur with liquid ingress. Shorten cables or use heavier cables. Recharge battery. Allow unit to Low voltage shutdown cool. Improve air Alarm sounds. or thermal shutdown has circulation around unit. occurred. Locate unit to a cooler environment. Reduce load if continuous operation is required.
  • Page 18: Specifications

    properly charged. able to fully recharge a battery. Make sure you use a powerful charger. Power dissipation in DC Use shorter/heavier DC cables. cables. 8. Specifications Specifications are subject to change without notice. AC Output Continuous AC output power 4000 W Max.
  • Page 19: Warranty

    25.96 lb (11.80 kg) 9. Warranty One Year Limited Warranty Program NPower warrants this product for one year limited against any defects in materials or workmanship. The defective products will be replaced and repaired at no charge in either of one year.
  • Page 20 To qualify for the warranty, make sure the product has not been disassembled or modified without the prior authorization. If you require warranty service with your product, please return it to the place of purchase along with a copy of your dated proof of purchase or call customer service at 800-222-5381 for details.

Table of Contents