Trane AQUASTYLUS CFEA 04 C0M1 Owner's Manual page 8

Chilled water fan coil convertible type cfea series 50/60 hz
Table of Contents

Advertisement

SLEEP (COOLING MODE)
By pressing SLEEP button, the unit will operate at SLEEP FUNCTION it will
automatically return to normal operation when the air-conditioner is switched
off and on again.
NORMAL
O
+ 2
C
+ 1
O
C
SET POINT
O
- 1
C
- 2
O
C
0
1
2
START
SLEEP (HEATING MODE)
By pressing SLEEP button, the unit will operate at SLEEP FUNCTION it will
automatically return to normal operation when the air-conditioner is switched
off and on again.
NORMAL
O
+ 2
C
+ 1
O
C
SET POINT
O
- 1
C
O
- 2
C
0
1
2
START
8
AW 02092023TRA
Black
Wireless Remote Control
SLEEP Mode
This feature automatically adjusts the
temperature setting to provide
increased comfort and save energy
(The SLEEP display on LCD will
disappear after 1 hour).
COOLING Mode
- Press SLEEP button, one hour
after pressing, the air conditioner
will automatically raise the set
temperature by 1
SLEEP
3
4
5
6
7
8
9
10
11
12
HEATING Mode
- Press SLEEP button, one hour
after pressing, the air conditioner
will automatically reduce the set
temperature by 1
(The SLEEP display on LCD will
disappear after 1 hour).
SLEEP
3
4
5
6
7
8
9
10
11
12
8
SWEEP Operation
The SWEEP function will operate in
either cooling or heating mode to
rapidly distribute conditioned air
into the room.
- The supply air grille will be fully
closed when the unit is off.
- When the unit is turned on, the
grille will open to the fully open
position.
- After the unit has been turned on,
O
C.
pressing the SWEEP button will
sweep the supply air grille back
and forth to rapidly distribute and
cool (or heat) the room.
- If the unit is in SWEEP mode,
pressing the sweep button will
return the grille to the fully open
position.
- Press the POWER button while the
unit is in operation, will turn off the
unit and the supply air grille will
automatically close.
LOUVER Operation
HOUR
The direction of the airflow can be
controlled.
- Press LOUVER button to adjust the
angle of the blade to control the
direction of the air flow.
Note : The sweep and louver
operations are optional functions of
O
C.
CFEA04-CFEA08. These operations
are not available in the models
that have cooling capacity more than
24,000 Btu.
HOUR
29/10/02, 2:51 PM
UNT-SVU001-EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents