Trane AQUASTYLUS CFEA 04 C0M1 Owner's Manual page 6

Indicators on Infrared
Remote Control
5
6
7
8
1. Clock
Displays the current time when the
handset is under POWER OFF
status.
2. Timer START
The time set for timer on operation
is indicated.
3. Timer STOP
The time set for timer off operation
is indicated.
4. Transmission Indicator
This transmission indicator lights
when remote control transmits
signals to the indoor unit.
5. SLEEP Mode
Displayed by pressing the SLEEP
button. Press the SLEEP button
again to disappear.
6. Temperature Setting
Displays the temperature setting
O O
(15 C to 30 C) When the handset is
under POWER ON status.
Note : No temperature setting
display when FAN Mode is
selected.
7. Fan Speed
Displays the selected fan speed.
Fan speed level, low (LOW),
medium (MED), high (HIGH),
auto (AUTO) will be indicated.
8. System Mode
Displays the current operation
mode. In cooling only (FAN, COOL
or DRY). In cooling and heating
system (FAN, COOL, DRY or HEAT).
6
AW 02092023TRA
Black
Wireless Remote Control
1
2
3
ON OFF
4
System Operating
Selection
FAN Only System Operation
- Press POWER button (the display
panel shows the previous settings).
- Press MODE button to select the
system operating mode, FAN mode
will be shown on the display.
- Press FAN button to select any fan
speed. The FAN display will show
LOW, MED, HIGH or AUTO
according to fan speed level, low,
medium, high and auto.
COOLING System Operation
- Press POWER button (the display
panel shows the previous settings).
- Press MODE button to select the
COOL operating mode, "COOL"
mode will be shown on the display.
- Press either TEMP ▲ or TEMP ▼
button to set the desired room
temperature. Temperature set
O O
range is 15 C to 30 C.
- Press FAN button to select any fan
speed. The FAN display will show
LOW, MED, HIGH or AUTO
according to fan speed level, low,
medium, high and auto.
6
DRY System Operation
- Press POWER button (the display
panel shows the previous settings).
- Press MODE button to select the
DRY operating mode, "DRY" mode
will be shown on the display.
- Press either TEMP ▲ or TEMP ▼
button to get the desired room
temperature setting at the
indication. Temperature set range
O O
is 15 C to 30 C.
Note : Fan speed cannot be changed
when DRY Mode is selected.
HEATING System Operation
(Heating/Cooling Models)
- Press POWER button (the display
panel shows the previous settings).
- Press MODE button to select the
HEAT operating mode, "HEAT"
mode will be shown on the display.
- Press either TEMP ▲ or TEMP ▼
button to set the desired room
temperature. Temperature set
O O
range is 15 C to 30 C.
- Press FAN button to select any fan
speed. The FAN display will show
LOW, MED, HIGH or AUTO
according to fan speed level, low,
medium, high and auto.
AUTO System Operation
(Heating/Cooling Models)
- Press POWER button (the display
panel shows the previous settings).
- Press MODE button to select the
AUTO operating mode, "AUTO"
mode will be shown on the display.
- Press either TEMP ▲ or TEMP ▼
button to set the desired room
temperature. Temperature set
O O
range is 15 C to 30 C.
- Press FAN button to select any fan
speed. The FAN display will show
LOW, MED, HIGH or AUTO
according to fan speed level, low,
medium, high and auto.
- The system will automatically
switch between cooling mode and
heating mode to maintain desired
temperature setting.
UNT-SVU001-EN
29/10/02, 2:51 PM