Part I Cleaning The Free Rollers - Böwe Bell + Howell Truper 3200 Cleaning Manual

Cleaning Guide for NCR™ Type Paper Residue
Cleaning the ADF section is performed in two parts:

Part I Cleaning the Free Rollers

Caution
Before cleaning the free rollers it is important to note that if there is heavy
residue (ex: image 1) it must be cleaned "dry" and vacuumed extensively after
cleaning every roller. Do not put any liquids/cleaners on the free rollers
before or during cleaning, as this will cause the residue to liquefy and drip
into the roller wells and shaft, where it will then dry and build up. This will result
in unsatisfactory performance of the rollers and make it necessary to replace
the rollers and shaft assembly.
This will not be considered as warranty service and will be subject to
1. Cut a strip (approx.1.5" x 4") of NCR
Residue Cleaning Pad
2. Using the NCR Residue Cleaning Pad
(S007611) scrub the NCR residue off the
free rollers. Apply "gentle" force as you
scrub the rollers side to side (see cleaning
direction). Continue to clean the roller by slowly rotating it with your finger until
the residue has been lifted off the roller's surface completely.
S006881
extensive labor charges!
NCR
9 of 7